Pipe_Wrap.jpg
hero03.jpg
hero02.jpg
hero01.jpg

Pipe Wrap®

  • Description
  • Technical Specs
  • Installation
  • Downloads

The Pipe Wrap® system, a durable, easy-to-use, pipe repair solution, protects against corrosion, abrasion, and impact in piping applications including petroleum refineries, chemical handling and mining. The Pipe Wrap® material, which is designed to repair leaks up to 450 psi, works underwater and is resistant to heat and harsh chemicals. It is impregnated with fiberglass tape that adheres to PVC, metal pipes and more. 

Mechanical Properties

Attribute- Tensile Modulus 
Method- ASTM D638
Value– 
659,206 psi

Attribute– Compression Modulus
Method– ASTM D695 
Value– 
53,450 psi

Attribute– Compression Strength
Method– ASTM D695 
Value– 
13,755 psi

System Properties

Attribute– Working Time 
Value– 3-5 minutes 

Attribute- Cure Time
Value– 30 minutes

Attribute– Shelf Life
Value– 2 years


1.jpg1. Position and Secure Compression Seal 
Seal and clamp leak. Mark the repair zone and abrade the surface using the emery strip. Solvent wipe the repair area.

 

 

2.png2. Apply Load Transfer Putty to Clams
Knead the epoxy putty until uniform, then apply to the clamp – eliminate sharp edges and form a transition area for composite application.

 

 

 

3.png3. Apply Epoxy Primer 
Mix and apply a 30 mil coating of epoxy primer. Allow the paste to thicken for 10-15 minutes – a “peanut butter” consistency is desired.

 

 

 

4.png4. Apply Pipe Wrap® 
Apply provided Pipe Wrap® using the cigar wrap method. A topcoat may be applied after two hours.

 

 

Click here to review the technical data sheet. 

Request more information about this product.

Contact Us