SplashGard___Main.gif

SplashGard™

  • Description
  • Technical Specs
  • Installation

The SplashGard™ system is a specialized coating system designed to easily adhere to wet steel surfaces and prevent corrosion. It is comprised of SplashBond™ Adhesive undercoating and Splash Wrap fiberglass cloth outerwrap, impregnated with moisture cured urethane (MCU) resin. The SplashGard™ system not only resists wave action and corrosion, but can also be applied underwater to provide structural reinforcement – perfect for use on risers.

Mechanical Properties

Attribute Tensile Strength 
Method ASTM D3039
Value 
51,800 psi

Attribute Tensile Modulus
Method ASTM D3039
Value 
3.01 x 106 psi

Attribute Poisson's Ratio
Method ASTM D3039
Value 
0.077

Thermal Properties

Attribute Thermal Expansion 
Method ASTM E831
Value 10.2 μm/m/°C

Attribute Heat Distortion Temperature
Method ASTM D648
Value 
205 °C

Attribute Max Operating Temperature
Method ASME PCC-2
Value 
185 °C

Attribute Application Temperature
Value -50°F to 120°F -46°C to 49°C

System Properties

Attribute Ply Thickness 
Value 22 mils (0.022 inches)

Attribute Working Time
Value 20 – 30 minutes

Attribute Set Time
Value 2 hours

Attribute Cure Time
Value 24 hours

Attribute Shelf Life
Value 1 year with proper storage

Attribute Stocked Sizes
Value From 2" X 12'  to 12" X 90'


1.png

1. Surface Preparation 
Remove all soft coatings and media blast the pipe to provide an anchor pattern (NACE 1 preferred). On dry surfaces, wipe the surface with a solvent such as Acetone, Toluene, or MEK. For structural repairs, mix and apply filler putty or paste to any defects.

 

 

2.png2. Apply SplashBond 
Mix equal parts of the SplashBond™ Epoxy Primer until uniform. Apply the primer to the pipe surface as instructed. Allow the primer to sit until a “peanut butter” thickness is achieved.

 

 

 

3.png3. Apply SplashWrap 
Follow the wrapping instructions for Pipe Wrap™ or A+ Wrap™, as applicable for the repair.

 

 

 

 

4.png4. Apply SplashBond™ Outer Coat 
Allow the material to cure. Then, mix and apply a coating of SplashBond™ as an outer coating.

Request more information about this product.

Contact Us